Standard Description
Outfitted with all the zero leak bidirectional checking sole-noid valves, this energy unit is intended to the operation of two independent circuits. Which are respectively for the major and subordinate platforms of the double scissors lift. Two cut-off valves are used for lowering the machine manually in case of energy reduction. If more independent circuits are required for your application please make contact with us for availability.
Remark: 1. Please talk to our sales engineer to the distinctive pump displacement, motor power or tank capacity.
2. CSA or UL licensed motors can be found on request.
Exclusive Notes
one. The AC motor is of S3 duty cycle, which might only perform intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean all the hydraulic elements concerned just before set up of the electrical power unit.
three. Viscosity with the oil shoud be 15~46 cst,and the oil must be clean and totally free of impurities,N46 hydraulic oil is recommended.
four. The electrical power unit should be mounted vertically.
five. Check the oil degree in the tank following the first working on the energy unit.
six. Oil altering is required immediately after the preliminary a hundred operation hrs,afterwards after every 3000 hrs.